60hp水冷式螺杆式冷水机的特点：
    1、多功能操作面板上装有电流表，控制系统保险，压缩机开关按钮，水泵开关按钮，电子温控制器，  

2、水箱式蒸发器内置自动补水装置，省去工程安装中的彭胀水箱方便安装及保养，适用于大温差小流量等特殊场合。

3.各项安全保护故障灯，机组启动运转指示灯，操作简单，使用方便。

4、机组配置单片式控制系统，内置压缩机干燥过滤器过及膨胀阀，维修手阀接口等装置，确保了机器可靠安全运行方便了保养维修。

5、水冷式冷凝器使用最新高效外螺纹铜管制作，散热量大，体积小巧。运用最新CAD/CAM加工技术，配合CNC加工中心制作完成，结构紧凑，可靠性高，外形美观，高效节能。

6、高品质压缩机作为冷水机的心脏(产地欧美日全原装名牌压缩机，内置安全保护，低噪音，省电耐用)。        

60hp水冷式螺杆式冷水机——节能冷水机的典型，武汉东星制冷科技有限公司将坚持以“节能”作为主要研发理念，不断开拓创新
     60hp水冷式螺杆式冷水机 螺杆式压缩机之容调系统是利用油压来控制，若温度低，油粘度高；立即启动压缩机可能会使容调系统动作不顺畅，故在系统运行前，需预加热约8小时左右再开机。容调系统由一个容调滑块、三个电磁阀及一组容调油压活塞组成。可调节的范围有25%、50%、75%、100%。利用油压活塞推动容调滑块，压缩机运转时，油压推动活塞，借助电磁阀的动作，控制油活塞的定位。而电磁阀则由系统的温度来控制。控制容调活塞的油系统从机壳的储油槽中，以压差的方式送入。经油过滤器后，用一支毛细管限流再送入油缸。若油过滤器阻塞或毛细管阻塞会造成容调动作失败。同理，如果电磁阀故障，也会有同样的情况发生。各容调电磁阀的得电失电情况见图Compressor displacement regulating system is utilized to control the pressure, if the temperature is low, the high oil viscosity; immediately start the compressor may make a capacity adjusting system action is not smooth, so in the system operation, pre heating for about 8 hours and then boot. Capacity regulation system is composed of a capacitance adjustable slider, a three electromagnetic valve and a capacity adjusting hydraulic piston. The adjustable range of 25%,50%,75%,100%. Use of hydraulic piston pushes the capacity-regulating sliding block, the operation of the compressor, oil pressure to push the piston, by means of electromagnetic valve, oil control piston position. The electromagnetic valve is composed of the temperature control system. A control volume adjustable piston oil system from a storage tank, with pressure difference way into. Through the oil filter, a capillary restrictor and into cylinder. If the oil filter blocking or capillary occlusion can result in a capacity adjusting action failed. Similarly, if the solenoid valve failure, will have the same situation occurs. Each volume adjustable electromagnetic valve of power failure

           您要求厂家给您提供：